Jasco RM25001 User Manual download pdf (Page 7)

1312

Any Mode chosen for Volume/Mute control MUST have

its own Volume/Mute function or the Volume/Mute

buttons will do nothing.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to

any one chosen Mode for Volume/Mute button control

without the needing to change to that Mode.

1. Press and hold the SETUP button until the green

indicator turns on, then release the button.

2. Press and hold the MUTE button until the green

indicator blinks off, then release the button.

3. Press and release the desired Mode button (TV,

VCR, etc.) for Volume/Mute control, the green

indicator blinks then stays on.

4. Press and release the MUTE button and the green

indicator turns off. The green indicator will blink

rapidly for three seconds if the Mode you have

selected has no Volume/Mute control.

5. All other Modes will now punch-through to your

chosen Mode for Volume/Mute control.

6. All “Visual” and “Audio” programmed Modes will

now punch-through to the respective Modes you

have chosen for Volume/Mute control.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own

Volume/Mute control. Note - If your chosen Mode has

no Volume/Mute functions of its own then the Volume/

Mute buttons will do nothing.

1. Press and hold the SETUP button until the green

indicator turns on, then release the button.

2. Press and hold the MUTE button until the green

indicator blinks off, then release the button.

3. Press and release the desired Mode button (TV,

VCR, etc.), the green indicator blinks then stays on.

4. Press and release the VOLUME- (Down) button, the

green indicator blinks then stays on.

5. Press and release the MUTE button and the green

indicator turns off.

6. All “Visual” and “Audio” programmed Modes will

now punch-through to the respective Modes you

have chosen for Volume/Mute control.

Setup, cont. Sleep Timer

The SLEEP button enables the remote to turn off your

TV after a period of 1 to 99 minutes as shown below.

The remote must be in TV mode to set a Sleep Timer.

This feature works even if your TV does not have a

sleep feature.

1. Press and release the TV device button.

2. Press and hold the SLEEP button until the green

indicator remains lit (about 2-3 seconds).

3. Release the SLEEP button.

4. Press and release the numeric buttons (01-99) for

the time required. The green indicator will blink off

to indicate button press acceptance.

5. TV Sleep Timer is set.

6. Leave the Remote pointing towards the TV with an

unobstructed path.

To cancel the Sleep Timer, press and hold the SLEEP

button until the green indicator blinks, or press and

release the ON-OFF button in TV mode.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Jasco RM25001 User Manual Page 7

Comments to this Manuals

Related products and manuals for Remote controls Jasco RM25001